[Top] [All Lists]

[TenTec] an antenna question

To: <tentec@contesting.com>
Subject: [TenTec] an antenna question
From: ku3g@yahoo.com (no body)
Date: Wed Apr 2 15:55:19 2003
it will work, the antenna being a mobile whip is proably about only 15 ohms, 
have rf no matter what you do , yes it will work without cuttiing the radials
73's john ku3g
im Miller <k4sqr@juno.com> wrote:No need to re cut radials. Since 30M 1/4w is 
longer than 17M 1/4w, it
will work fine.

Good luck,

Jim Miller, K4SQR
4-Square Experts, Stack Yagi
& Remote Antenna Switching Systems

On Wed, 02 Apr 2003 13:13:31 -0500 KZ2G writes:
> I'm using a Pro-Am mobile whip mounted on a wooden utility pool on 
> the
> corner of my Levitt house. It's for 30 meters. I have 4 radials 
> cut for
> it, 1/4 wave of 30 meters. It works fine with my MFJ Versa Tuner on 
> my Omni
> 6+. But i want to remove the 30-meter Pro Am whip and put a 
> 17-meter Pro Am
> whip in its place WITHOUT RECUTTING THE 4 RADIALS. What's ur 
> opinion? Will
> i be able to tune it on 17-meters ok with the Versa Tuner?
> Bob, KZ2G --- 10-10 # 10148
> ----------------------------
> Omni 6 Plus (Base) & FT-100D (Wheelchair Mobile), C U on 
> CW!
> See my Ham web at 
> http://www.geocities.com/ram9872002/kz2g.htm
> Check out my Art Sale at 
> http://www.geocities.com/ram9872002/Artpage1.htm
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
TenTec mailing list

Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
<Prev in Thread] Current Thread [Next in Thread>