Only 2 pins used (top and bottom) if using a non Ten Tec PS.
The detachable plug "pins" are of the female gender. Advise getting
as much wire contact with pin as possible before soldering down the wire,
as there is not much metal at the top of the hole to carry the full key
On Sun, 6 Apr 2003 14:26:59 -0700 "Rick Williams"
> On the 20 metre net today a request was made for a source for parts
> for the
> Ten-Tec power connectors for the Omni V/VI rigs. These are
> available from
> Mouser. To make a cable the following AMP Universal Mate-N-Lock
> parts are
> - Pin Housing Part Number 571-14807020 (1 needed)
> - Insert pins Part Number 571-3505501 (4 needed)
> I suggest you check the configuration and numbers to be sure you get
> appropriate "gender".
> TenTec mailing list