So you press the button once and get "XM",
which multiplies the tuning rate.
What if you could press the button again
and have "-XM", which would divide the
The third button press would return to
Mike - WB4HUC
----- Original Message -----
From: "Michael A. Newell, WB4HUC" <email@example.com>
Sent: Friday, April 11, 2003 7:12 PM
Subject: Re: [TenTec] ORION 1.337 Tuning Steps
> Boy, that is a nice feature. Keeps you
> from having to go into the menu to
> change tuning rates when you go
> from say, cw to ssb or vicey versey.
> Just leave it on the 10hz tuning rate
> for cw and press the main/sub rx button when
> you need bigger steps for SSB.
> But...if, on the sub receiver, they
> would bump the 100k steps up
> to 1 mhz steps when the sub rx
> button is pushed again, it'd be
> great! you could really go from one
> sw band to another quick that way.
> Mike - WB4HUC
> Austin, TX
> ----- Original Message -----
> From: "Bill Miner" <firstname.lastname@example.org>
> To: <email@example.com>
> Sent: Friday, April 11, 2003 6:42 PM
> Subject: [TenTec] ORION 1.337 Tuning Steps
> > I don't remember who it was that did not like the tuning steps on the
> > ORION or the fact that the frequency did not get rounded off when
> > changing tuning steps but.... Hey! The latested Flash Upgrade answers
> > those issues and really works nice.
> > Thank You Ten Tec!
> > 73,
> > Bill - K6WLM
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> TenTec mailing list