[Top] [All Lists]

[TenTec] Orion memory to vfo behaviour

To: <tentec@contesting.com>
Subject: [TenTec] Orion memory to vfo behaviour
From: k7kj@arrl.net (Greg Hodsdon)
Date: Sun Apr 13 19:13:27 2003
My Orion behaves exactly the same way.

BTW, the high noise level I was hearing during the TT net
was due to a hail storm and not to my neighbor's air compressor.

73 de Greg, K7KJ

Greg Hodsdon
Portland, OR
----- Original Message ----- 
From: "Michael A. Newell, WB4HUC" <mnewell1@austin.rr.com>
To: "tentec" <tentec@contesting.com>
Sent: Sunday, April 13, 2003 3:23 PM
Subject: [TenTec] Orion memory to vfo behaviour

I just had something happen when copying
a frequency from memory to VFO B.

VFO A is on 7.251. I had manually tuned 
VFO B to a different frequency. The sub
rx is assigned to VFO B.

I pressed the RECALL button and used the
MULTI knob to go to the memory I wanted
to recall then pressed the M>VFO B

Here's what happened: VFO B tuned to
the memory frequency, but the VFO B
display changed to the frequency of VFO A,
which was 7.251. So I'm seeing 7.251 in VFO
B, but listening to the correct frequency.

A turn of the sub rx tuning knob corrected
the frequency display.

Anyone else have this happen?


Mike - WB4HUC
Austin, TX

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>