My Orion behaves exactly the same way.
BTW, the high noise level I was hearing during the TT net
was due to a hail storm and not to my neighbor's air compressor.
73 de Greg, K7KJ
----- Original Message -----
From: "Michael A. Newell, WB4HUC" <email@example.com>
To: "tentec" <firstname.lastname@example.org>
Sent: Sunday, April 13, 2003 3:23 PM
Subject: [TenTec] Orion memory to vfo behaviour
I just had something happen when copying
a frequency from memory to VFO B.
VFO A is on 7.251. I had manually tuned
VFO B to a different frequency. The sub
rx is assigned to VFO B.
I pressed the RECALL button and used the
MULTI knob to go to the memory I wanted
to recall then pressed the M>VFO B
Here's what happened: VFO B tuned to
the memory frequency, but the VFO B
display changed to the frequency of VFO A,
which was 7.251. So I'm seeing 7.251 in VFO
B, but listening to the correct frequency.
A turn of the sub rx tuning knob corrected
the frequency display.
Anyone else have this happen?
Mike - WB4HUC
TenTec mailing list