I've had two confirmations that I'm not
imagining the memory to VFO B problem.
I've emailed TT about it.
Thanks,
Mike - WB4HUC
Austin, TX
----- Original Message -----
From: "Greg Hodsdon" <k7kj@arrl.net>
To: <tentec@contesting.com>
Sent: Sunday, April 13, 2003 6:13 PM
Subject: Re: [TenTec] Orion memory to vfo behaviour
> Mike:
> My Orion behaves exactly the same way.
>
> BTW, the high noise level I was hearing during the TT net
> was due to a hail storm and not to my neighbor's air compressor.
>
> 73 de Greg, K7KJ
>
> Greg Hodsdon
> Portland, OR
> k7kj@arrl.net
> http://www.qsl.net/k7kj
> ----- Original Message -----
> From: "Michael A. Newell, WB4HUC" <mnewell1@austin.rr.com>
> To: "tentec" <tentec@contesting.com>
> Sent: Sunday, April 13, 2003 3:23 PM
> Subject: [TenTec] Orion memory to vfo behaviour
>
>
> I just had something happen when copying
> a frequency from memory to VFO B.
>
> VFO A is on 7.251. I had manually tuned
> VFO B to a different frequency. The sub
> rx is assigned to VFO B.
>
> I pressed the RECALL button and used the
> MULTI knob to go to the memory I wanted
> to recall then pressed the M>VFO B
> button.
>
> Here's what happened: VFO B tuned to
> the memory frequency, but the VFO B
> display changed to the frequency of VFO A,
> which was 7.251. So I'm seeing 7.251 in VFO
> B, but listening to the correct frequency.
>
> A turn of the sub rx tuning knob corrected
> the frequency display.
>
> Anyone else have this happen?
>
> 73,
>
> Mike - WB4HUC
> Austin, TX
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|