[TenTec] OMNI V Problem

[k2zn@rochester.rr.com (Al Scanandoah)]

Rick

Have you tried applying a signal to the AUDIO IN jack on the rear panel?  
It's in parallel with the front panel mic connector.  At the very 
least, you'll be able to verify if the rest of the TX audio chain is 
working or not.

Another thing to try is to remove the TX Audio/BFO board and touch up 
the soldering.  I've had my PLL board behave erratically due to a 
couple of poor connections.

Al, K2ZN