Interesting....I, too, have a problem with my Omni VI which just arrived
from Ten Tec service and has the same problem it went to Ten Tec service
Too busy with the Orion, I guess.
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of firstname.lastname@example.org
> Sent: Monday, April 14, 2003 4:19 PM
> To: email@example.com
> Subject: [TenTec] OMNI V Problem
> Once again before I send my OMNI V back to Ten Tec, I am looking
> for advice.
> The rig does not work on SSB for very long. I can pull the plug
> back and forth
> into the socket and make it work for a small while, but SSB eventually
> I did send the rig back to Ten Tec and they repaired an "intermittent PLL
> connection." This worked for a while but not for long. I
> hesitate to send the
> rig back to them (I'll call them tomorrow after posting this
> note) because this
> problem was not repaired the last time.
> Perhaps the problem has to do with making the proper connection
> with the mike
> plug. I received an interesting e-mail on this.
> P.S. I am unemployed and want an unexpensive solution to this.
> Pfafftown, NC
> TenTec mailing list