[Top] [All Lists]

[TenTec] Scout Power setting mods

To: <tentec@contesting.com>
Subject: [TenTec] Scout Power setting mods
From: rohre@arlut.utexas.edu (Stuart Rohre)
Date: Fri Apr 25 17:46:13 2003
The simplest power setting remoting mod is to unsolder the internal pot used
to set power thru screwdriver hole on bottom of radio.

Run three conductor flat cable from the 3 holes on board out the back panel.
Mount a bracket there to hold the pot, or sub a thru panel small linear pot
for the original.  Mount a knob or use screw driver adjustment, and you have

The 3 conductor flat cable in 26 gauge easily goes thru the space between
the cover and back panel.
Stuart K5KVH

<Prev in Thread] Current Thread [Next in Thread>