Re: (Fwd) Re: [TenTec] Corsair versus Paragon?

[Bwana Bob <wb2vuf@qsl.net>]

I did the same, but I also replaced several aluminum electrolytic caps
that were microphonic, with tantalum caps. 

                        Bob WB2VUF

Rich Gaarden wrote:
> 
> I repaired a Paragon II by reflowing what looked to me like a poor solder
> joint on a PLL board.  In any case it cured the problem.
> 
> Rich KF3DQ
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec