Marcus
It sounds like the 30m bandpass filter may be in need of realignment.
The board is on the bottom side of the rig. If you've got a manual,
it's pretty easy to locate the right coils and adjust.
Al, K2ZN
Marcus Harton wrote:
>
> I'm a new Ten Tec owner thanks to the Omni D Model-B I bought a bit over
> a month ago. I've been lurking the list for a while and know you mostly
> talk about the newer rigs, but I wonder if some of you who've been into
> Ten Tec's for a while might have an idea about something my radio does.
>
> I've got great output on every band but 30 meters. 30 meters is
> considerably lower than the others, about 25 watts max into a dummy
> load. I read in the manual that 10mhz and 28mhz share the same tuning
> circuitry. My 28mhz output is very good. Any suggestions on this? I
> thought I'd ask in case this is a common issue with the Omni D.
>
> Thanks & 73
>
> Marcus Harton, nz4e
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|