TenTec
[Top] [All Lists]

[TenTec] Why Ethernet?

To: <tentec@contesting.com>
Subject: [TenTec] Why Ethernet?
From: AC5E@aol.com (AC5E@aol.com)
Date: Sat May 31 13:58:11 2003
I certainly agree it's about time to change to something besides an RS232 
port  Including a serial port means the customer must shop carefully to make 
sure 
they can hook up their rig. Todays most common choices are Ethernet, USB, and 
Firewire.  And then there's the other hundred "new and improved"  stars of 
tomorrow. If they catch on - which most probably will not. 

While there's nothing really wrong with the typical Ethernet port, I don't 
network my rigs all that often.  But between the rotor interfaces, computer 
logging, keyer, amp interface, etc., etc., there are a whole bunch of wires 
going 
to the back of the shack computer and ham gear.  Far too many for either 
comfort or easy servicing. 

So I would prefer either a regular USB or Firewire port on a rig. At the rig 
end, there's very little difference in cost of implementation between any of 
the common choices, and far  more confusors come with USB/Firewire than network 
ports these days.  A single strategically located hub with a couple of more 
daisy chained to it would sure relieve a lot of the clutter around here. 

73  Pete Allen  AC5E
<Prev in Thread] Current Thread [Next in Thread>