Thanks for sharing - very interesting!
73,
John W0DC
----- Original Message -----
From: "Mike Hyder -N4NT-" <N4NT_Mike.Hyder@charter.net>
To: <Ynkedragon@aol.com>
Cc: <tentec@contesting.com>
Sent: Tuesday, June 03, 2003 4:21 PM
Subject: Re: [TenTec] Back in the Ten Tec Family
> having fought several battles with noise, i made a list of things i've
found
> over the years. hope it helps somebody. it's at
> http://www.qsl.net/n4tn/noise.html
>
> 73, Mike N4NT
>
> ----- Original Message -----
> From: <Ynkedragon@aol.com>
> To: <tentec@contesting.com>
> Sent: Tuesday, June 03, 2003 1:50 PM
> Subject: Re: [TenTec] Back in the Ten Tec Family
>
>
> > In a message dated 06/02/2003 18:32:28 Eastern Daylight Time,
> > k5uj@hotmail.com writes:
> >
> > << The Corsair II is a great rig, especially for CW in my opinion, but
it
> > sure
> > can be terrific on phone too. If it does not already come equipped, I
> > recommend getting the two optional xtal IF filter slots filled. I use
> the
> > TT 250 hz and 1.8 Khz filters. >>
> > While I liked the standard T-T 2.4 KHz & 500 Hz filters, I can't say the
> same
> > about the 250 Hz and 1.8 KHz. I had both in my Corsair II but ended up
> using
> > them almost never. Both were very, very narrow and seemed to have a
fair
> > amount of loss. The 1.8 filter degraded speech intelligibility.
Instead,
> for
> > something a bit tighter than "stock" I'd look at the INRAD 2.1 KHz and
350
> or
> > 400 Hz filters.
> >
> > And, yes, the Corsair II is a magnificent CW radio. Sold it only after
> power
> > line problems in the neighborhood gave me a multi-year, S9+30 line noise
> > problem, but that's a story for another day.
> >
> >
> > 73, Blair k3yd
> >
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|