TenTec
[Top] [All Lists]

Re: [TenTec] The Paragon - Your opinion please

To: tentec@contesting.com
Subject: Re: [TenTec] The Paragon - Your opinion please
From: VE1BN@aol.com
Reply-to: tentec@contesting.com
Date: Tue, 30 Mar 2004 19:21:07 EST
List-post: <mailto:tentec@contesting.com>
Hello Peter -

You are asking about the Paragon.   I have both the original Paragon
(with a Giehl chip installed), and the Paragon II.  I am a CW operator, 
have been since December '45.

The Paragon is a general coverage transceiver,  receives from 100 kHz 
to 30 mHz.  Power output is about 95 Watts.

Specs on the Paragon are good, for instance, blocking is 136 dB and 
the dynamic range is excellent.  Actually better than the OMNI VI and VI+ 
sets. Also has very good crystal filtering from 6 kHz through 250 
Hz, in five positions, which include 2.4 kHz, 1.8 kHz, 500 Hz.  

I had owned an OMNI 6+ for a number of years but sold it. There were just too 
many birdies from its many oscillators.  With extensive extra bypassing not 
all could be eliminated.  The Paragons do not have this disadvantage.  Quite 
quiet. Phase noise is really nonexistant. Any that 
is heard has been generated by the "other guy's" JA rig.

Keying characteristic of these rigs is a smooth make and break, no key 
clicks.  When I had the OMNI 6+ a local ham about 4 miles from me 
complained of clicks that could not be reduced due to the design.  As 
a CW op, you would appreciate a clickless signal with an absolutely 
great QSK.  

You are quite correct thinking it is a classic. It really is. Receivewise, 
I don't think one can find a better rig. All this without a myriad of bells 
and whistles, many of which get little use. I am satisfied with my easy 
to operate rigs.

It may not have DSP but it does have PBT and BandPass tuning, etc.
I never missed the DSP because I can copy any signal on the band 
without it, whether in a pileup, DXing or general ragchewing, with the 
controls provided.

If you are thinking of picking up an original Paragon, it should have a 
Giehl RAM chip.  This chip allows you to switch bands with a single 
pushbutton rather that having to actually punch in the individual  frequency 
digits, or band, on the keypad.  It makes the older set approximate the P-2.  
Costs about $50 US and is available.

Oh yes, with the P-2 I had no problem working 3B9C, even on 28 mHz 
using a Cushcraft R-5 vertical (at 45 metres up).  My tower is a high-
rise apartment building (hi).

Hope you can try the Paragon II sometime to see for yourself. If you 
have any questions, please let me know?  Be pleased to try to answer
them.
  
73 -  Don,  VE1BN@aol.com





_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>