My shack is two floors above our telephone computer (don't know the English
name for that little black box). I originally ran a cable upstairs with 4
wires inside (not twisted) but it was shielded. I had lots of hum and
static noises on the line. After a couple of years I replaced it with
twisted and shielded line and there was no more hum or static noises.
73
Rick
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Chuck (Jack) Hawley
Sent: Thursday, April 15, 2004 11:40 PM
To: tentec@contesting.com
Subject: RE: [TenTec] 450 Ohm feedline
Actually I think a great benefit is from reducing crosstalk from adjacent
pairs. The benefit of twisting tends to be significant up to around
30MHz...by one account I read.
Chuck, KE9UW
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]On Behalf Of Robert & Linda McGraw
> K4TAX
> Sent: Thursday, April 15, 2004 20:57 PM
> To: tentec@contesting.com
> Subject: Re: [TenTec] 450 Ohm feedline
>
>
> Regarding twisting the feed-line, why do you suppose the phone company
> called it "a twisted pair"? Answer: because that what it was and it was
> used to maintain symmetry and thus reduce induced voltage from overhead
> power lines. Same applies here.
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.654 / Virus Database: 419 - Release Date: 4/6/2004
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|