Frank -
You might want to call Marshall Emm at Morse Express (se his website) and ask
about his digital readout DD-1. I used one and they are excellent. You can also
set them to run with multiple radios.
73/Tim NZ7C
============================================================
From: Frank Sanfilippo <wb2tdt@yahoo.com>
Date: 2004/06/25 Fri PM 12:30:23 EDT
To: tentec@contesting.com
Subject: [TenTec] Adding a frequency counter to the Argo 509 ie: SWL Freq
Mite
Hi everyone,
I have an Argo 509 i just blew the dust off of recently and its been working
well but I would really like to add a frequency counter to the rig preferably
one that outputs the freq in CW injected into the audio stage.
I was told by Ten tec that this cannot be done due to the type on conversion
scheme the 509 uses, however I see posts in the archives where other Hams equip
their 509's with digital frq. readout. If anyone is familiar with doing this I
would greatly appreciate hearing from you.
I have the SWL Freq Mite and I have no idea where to pull the RF from for it to
read. I can select pretty much any IF freq with it but really am not sure how
to do it if it can be done.
Thanks in advance,
Frank WB2TDT
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
============================================================
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|