TenTec
[Top] [All Lists]

Re: [TenTec] Orion Losing RX Audio

To: <tentec@contesting.com>
Subject: Re: [TenTec] Orion Losing RX Audio
From: "Tommy" <aldermant@alltel.net>
Reply-to: tentec@contesting.com
Date: Mon, 12 Jul 2004 08:34:04 -0400
List-post: <mailto:tentec@contesting.com>
The question is:  Did you snag S9SS??

Yes, when the SubRX breaks into oscillation, the SubRX S-mtr goes to about
3/4 scale.

Tom - W4BQF

----- Original Message -----
From: "Duane A Calvin" <ac5aa@juno.com>
To: <tentec@contesting.com>
Sent: Sunday, July 11, 2004 10:19 PM
Subject: Re: [TenTec] Orion Losing RX Audio


> I use an Alpha 99 via keying loop 1, but I use the KEY input on the rear
> (y-adapter for the Logikey on one side and the parallel port circuit on
> the other side).  Have only run about 30 minutes of fairly heavy DX
> chasing (calling S9SS this afternoon), and no problem yet.  Granted, I
> haven't given it a lot of chance to fail, but maybe using the key input
> makes a difference? (This is similar to a problem reported earlier, if I
> remember right, but I don't recall it being linked to the SubRX going
> "into oscillation" - doesn't the SubRX S-meter go to 3/4 scale or so?)
>
>         73,  Duane
>
>
> On Sun, 11 Jul 2004 17:53:18 -0500 "A. Sewell" <n5na@att.net> writes:
> > I'm running an Alpha 89.  I had been using Keying Loop 1 when I
> > operated in
> > the WPX contest but I am just using Amp Key 1 now instead of the
> > loop.
> >
> > 73,
> >
> > Alan
> > ----- Original Message -----
> > From: "Tommy" <aldermant@alltel.net>
> > To: <tentec@contesting.com>
> > Sent: Sunday, July 11, 2004 5:40 PM
> > Subject: Re: [TenTec] Orion Losing RX Audio
> >
> >
> > > What amplifier are you  running with your Orion? Are you using
> > either
> > Keying
> > > Loop 1 or Keying Loop 2 with your amp?
> > >
> > > ----- Original Message -----
> > > From: "jack" <jfriend31@comcast.net>
> > > To: "A. Sewell" <n5na@att.net>; <tentec@contesting.com>
> > > Sent: Sunday, July 11, 2004 6:34 PM
> > > Subject: Re: [TenTec] Orion Losing RX Audio
> > >
> > >
> > > > i find that loss of audio interesting. i have one computer
> > controlled
> > > keyer
> > > > in the back socket of my Orion and an MFJ keyer in the front CW.
> > neither
> > > has
> > > > caused even one moment's problem for the Orion. i have used all
> > the
> > > firmware
> > > > since my Orion arrived with the 1.358 version installed.
> > > >
> > > >
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
> --------------------------------------
> Duane Calvin, AC5AA
> Austin, Texas
>
> http://home.austin.rr.com/ac5aa
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>