That's great information Mark. Thanks for sharing it with us.
73,
Carl Moreschi N4PY
Franklinton, North Carolina
n4py@earthlink.net
----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: <tentec@contesting.com>
Sent: Tuesday, July 20, 2004 3:43 PM
Subject: [TenTec] DRM on the Orion
> Continuing in my DRM experiments with the open source Dream software, I
> fabricated a simple Y cable to bring the 14 kHz IF from the Orion
> sub-receiver out to the SPARE jack on the back. I fed that directly into
the
> soundcard line input and had no trouble receiving a DRM broadcast from the
> CBC. The software found the DRM signal at 14 kHz and locked on to it. I
was
> able to tune the Orion to the published broadcast frequency. The Y cable
> can be easily removed and the Orion restored to it's original condition
> without any soldering and both ends of the cable are easily reached with
> just the top cover removed.
>
> 73,
> Mark
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|