TenTec
[Top] [All Lists]

Re: [TenTec] Orion loss of audio

To: <tentec@contesting.com>
Subject: Re: [TenTec] Orion loss of audio
From: "Toby Pennington" <toby423@earthlink.net>
Reply-to: tentec@contesting.com
Date: Thu, 29 Jul 2004 10:27:33 -0400
List-post: <mailto:tentec@contesting.com>
Great news! Problem solved.  Toby
W4CAK

----- Original Message ----- 
From: "Mark Erbaugh" <mark@microenh.com>
To: <tentec@contesting.com>
Sent: Thursday, July 29, 2004 10:28 AM
Subject: Re: [TenTec] Orion loss of audio


> Thanks to those who tested my situation. The condition was repeatable. I
> cycled the power and was able to repeat the audio loss.  I went ahead and
> did a MASTER RESET and now the problem seems to have gone.  I am certain
> that I did a MASTER RESET after updating to firmware 1.371 when I first
got
> the Orion a few weeks ago (it came with an older version of the firmware).
>
> 73,
> Mark
>
> ----- Original Message ----- 
> From: "Jeff Griffin" <kb2m@comcast.net>
> To: <tentec@contesting.com>
> Sent: Thursday, July 29, 2004 10:00 AM
> Subject: Re: [TenTec] Orion loss of audio
>
>
> > Mark I also tried to duplicate your audio loss problem here, audio
remains
> > stable . Ver 1.371...
> >
> > 73 Jeff kb2m
> >
> > ----- Original Message ----- 
> > From: "Toby Pennington" <toby423@earthlink.net>
> > To: <tentec@contesting.com>
> > Sent: Thursday, July 29, 2004 9:48 AM
> > Subject: Re: [TenTec] Orion loss of audio
> >
> >
> > > Mark, I tried to duplicate your loss of audio by holding down the A>B
> > > button but on my Orion the audio does not go away but remains stable.
> > Toby
> > > W4CAK
> > >
> > > ----- Original Message ----- 
> > > From: "Mark Erbaugh" <mark@microenh.com>
> > > To: <tentec@contesting.com>
> > > Sent: Thursday, July 29, 2004 9:32 AM
> > > Subject: [TenTec] Orion loss of audio
> > >
> > >
> > > > A while back, there was discussion on the reflector about complete
> loss
> > of
> > > > Orion receive audio.  Was this ever resolved?
> > > >
> > > > I have found a repeatable way to lose and recover the main receiver
> > audio.
> > > > The behaviour indicates it may be a glitch in the firmware.
> > > >
> > > > I was listening to 40m CW on the main receiver connected to VFO A.
By
> > > > pushing down and holding the A->B button for a second or two I can
get
> > the
> > > > audio to go completely away (I am also monitoring the audio on the
> Left
> > > > output on the rear AUX I/O via my computer and that goes away also).
> By
> > > > pushing the A->B button I can get the audio to come back.  I'm
running
> > > > firmware version 1.371.
> > > >
> > > > 73,
> > > > Mark, N8ME
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>