[TenTec] Re: IC706 keyer connection

[john.brewer@us.schneider-electric.com]

>On my IC-706 mobile rig, the front panel is detachable and everything can be
>connected and controlled from the remote front panel - except the paddle.

Hi Rick,

Happily that's not true!

You can use the mic connector on the detachable front plate, as the
keyer input. I snagged some scrap network cable , lopped off the end
and connected my paddles that way. Works fine (and it's documented
although not obvious, in the manual).

73 es good luck
John K5MO (IC706 CW mobile)