|Subject:||[TenTec] Re: [Orion] CQ WW SSB - 10 meters|
|From:||Bill Tippett <email@example.com>|
|Date:||Tue, 02 Nov 2004 13:28:10 -0500|
I wrote: >My voice recorder worked perfectly all weekend.
WB3LGC wrote: >Is that "send 1", "send 2" ??
SEND 1, 2 AND 3. I had slightly different CQ messages recorded in each (of course #3 is lost when Orion is powered down). I cannot comment on your problems with NR since I only used the hardware NB when there were no strong stations around at band openings and closings. I did occasionally use AN and had no problems at all, but never used NR. This was using the latest Beta of 1.372 which should be released soon.
Have you tried a Master Reset (Batter Failure message)?
A full Master Reset is a very good idea if you seem to be having unique problems. If that does not solve your problem, you should call Paul Clinton, Service Manager at Ten-Tec. Of course you can also report it to firstname.lastname@example.org .
73, Bill W4ZV
_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
|<Prev in Thread]||Current Thread||[Next in Thread>|