[Top] [All Lists]

RE: [TenTec] TXCO unit

To: <tentec@contesting.com>
Subject: RE: [TenTec] TXCO unit
From: "John Clifford" <johnclif@ix.netcom.com>
Reply-to: johnclif@ix.netcom.com, tentec@contesting.com
Date: Wed, 3 Nov 2004 22:44:06 -0800
List-post: <mailto:tentec@contesting.com>
Someone with more electronics knowledge than I (just about anyone), please
explain the following:

* How would one design a xtal-based oscillator that uses a PLL to slave
itself to a master oscillator when the slave xtal frequency is not a
multiple/divisor of the master reference frequency?

I'm thinking specifically of how to get a 10 Mhz TXCO to provide a reference
for a 9 Mhz and 9.030 Mhz xtal so that they can be absolutely locked in via
a PLL.

Thanks for any explanations.

 - jgc

John Clifford KD7KGX

Elecraft K2 #1678 /KSB2/KIO2/KBT2/KAT2/KNB2/KAF2/KPA100
Ten-Tec Omni VI/Opt1, Centaur, 238B
Alinco DR-605TQ, DJ-V5
Icom T90A

IRLP #3978

email: kd7kgx@arrl.net

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>