|Subject:||Re: [TenTec] QSK with QSK-5PC|
|Date:||Thu, 11 Nov 2004 17:10:28 -0500|
'Figure of merit' ? I don't think so. The primary purpose of an
amplifier is to amplify. QSK in an amplifier is a sometimes added
I think if you would get same Ten Tec manuals and study the schematics, you would understand how the Ten Tec QSK system works. It is the amplifier that keys the transceiver and the amplifier does not key the transceiver until all of the amplifiers relays are closed. Most Ten Tec amplifier vacuum relays have a closure time spec of 6 milliseconds.
In my opinion, the Alpha 87A, which uses PIN diodes for T/R switching would have to be the quickest amplifier with QSK. The Ten Tec line of amplifiers are no slouches. Even though they are not guaranteed to run QSK over 40 wpm, my Titan 425 handled 120 wpm quite well and my Titan 3 handles up to 80 wpm quite well. As for a 'really' good high speed QSK radio, my opinion is the Corsair II and the Icom IC-781, with the Omni 6 and the Omni 6 Plus coming in a very close second.
Tom - W4BQF
----- Original Message ----- From: <email@example.com>
Sent: Thursday, November 11, 2004 4:45 PM
Subject: RE: [TenTec] QSK with QSK-5PC
Hi, Duane. Well, you've got an interesting point. If it's a fixed value, then as my CW speed increases, the relay delay time becomes a bigger and bigger percentage of my inter-dit time, and at some speed that will cease to be QSK.
This brings up a point. Maybe a figure of merit for an amplifier would be the maximum speed at which you can still hear in between dits.
I wonder which amp/rig combination is the fastest one out there right now? I was hoping that the QSK aficionados would have already run through every amp on the face of the earth and rated them according to this figure of merit.
TenTec mailing list
_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
|<Prev in Thread]||Current Thread||[Next in Thread>|