[Top] [All Lists]

Re: [TenTec] Argonaut 509...The Saga Begins

To: tentec@contesting.com
Subject: Re: [TenTec] Argonaut 509...The Saga Begins
From: Al Scanandoah <k2zn@rochester.rr.com>
Reply-to: tentec@contesting.com
Date: Mon, 15 Nov 2004 12:08:59 +0800
List-post: <mailto:tentec@contesting.com>

With regard to the band switch, make sure that the linkage between the two switches is intact. There should be two small brass rods held in place with little plastic buttons. If the rods are bent and/or one is missing, you'll have a tough time changing bands.

You'll probably have to clean off the old caked grease from this mechanism and re-lube as well.


_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>