|Subject:||Re: [TenTec] Argonaut 509...The Saga Begins|
|From:||Al Scanandoah <email@example.com>|
|Date:||Mon, 15 Nov 2004 12:08:59 +0800|
With regard to the band switch, make sure that the linkage between the two switches is intact. There should be two small brass rods held in place with little plastic buttons. If the rods are bent and/or one is missing, you'll have a tough time changing bands.
You'll probably have to clean off the old caked grease from this mechanism and re-lube as well.
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TenTec] Hi power Ten Tec ant tuner swr drift?, Michael Tope|
|Next by Date:||RE: [TenTec] Re: FULL QSK? What it is, al_lorona|
|Previous by Thread:||Re: [TenTec] Argonaut 509...The Saga Begins, Clark Savage Turner|
|Next by Thread:||Re: [TenTec] Argonaut 509...The Saga Begins, Cellobrown|
|Indexes:||[Date] [Thread] [Top] [All Lists]|