From: "Tony" <firstname.lastname@example.org>
Subject: [TenTec] Omni D help Please
Date: Thu, 18 Nov 2004 19:39:53 -0000
Please could anyone out there help with the following problems with OMNI-D
1. heavy clicks rx audio output on QSK and on TX/RX changeover on semi
break-in, the transmit
sig is fine. With CQWW CW coming up I'd be very grateful if someone could
come up with a cure for this, at present I position the headphones about an
inch in front of my ears and turn up the AF gain, but this isn't too good
on very weak sigs.
2. SWR meter seems very reluctant to indicate more than approx 2 : 1 SWR
no matter how badly
mismatched the load is - I think this may be related to the non operation
of the ALC on the rig.
Thanks in anticipation
TenTec mailing list