There are some samplers on the www.nm3e.com site for little money as well
as the Bird samplers for more.
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org]On Behalf Of Dick Green WC1M
> Sent: Thursday, November 25, 2004 0:05 AM
> To: email@example.com; firstname.lastname@example.org
> Subject: RE: [TenTec] Tentec Orion & Oscilloscope question
> I use a Bird 4263 RF Sampler. It's designed for exactly what you
> want to do.
> You put it inline with the coax, and it has a sampling port for your scope
> probe. Insertion loss is minimal. See the following link, near
> the bottom of
> the page:
> Hope this helps.
> 73, Dick WC1M
> > -----Original Message-----
> > From: Eric SENSI [mailto:email@example.com]
> > Sent: Tuesday, November 23, 2004 3:41 PM
> > To: firstname.lastname@example.org
> > Subject: [TenTec] Tentec Orion & Oscilloscope question
> > Hello all,
> > As I'm not an electronic engineer but just an IT engineer :-)
> > I'd like to know the better way to take the "modulated
> > signal" to inject it into an oscilloscope ?
> > I'm very new to this so be cute with me please.
> > At the moment I have :
> > - A Tentec Orion;
> > - A Tektronix 453A oscilloscope (in very nice shape and
> > working condition, bought from a Tektronix engineer for nothing !)
> > (it's a 50MHz Dual Channel Delayed Sweep Oscilloscope);
> > - A new set of oscilloscope probes with 1:1 and 1:10 attenuation;
> > - A bunch of newbie questions ! HI
> > I'd like to see my modulation signal on the scope while I'm
> > talking. I know a guy who is using a "T" shapep M/F/F plug at
> > the end of the ANT 1 output... One way goes to the antenna,
> > the other to the probe ! I'm not sure it's the better way to
> > catch the signal but I can't tell you exactly why. I'm afraid
> > of that "open" connection on one side of the output SO-239
> > socket... think it's not good for the PA itself.
> > Is there another output on the Orion to catch the signal ?
> > Via the transverter output jack (I don't think so, because
> > the main transmitter is not enabled in that case)... or on
> > the AUX I/O or the LINE OUT RCA jack ?
> > Many thanks to those who will help with this !
> > All the best, Eric de ON6CV.
> TenTec mailing list
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.4.2 - Release Date: 11/24/2004
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.4.2 - Release Date: 11/24/2004
TenTec mailing list