Yes, someone else pointed out the typo to me. I meant 4273. Sorry about
> -----Original Message-----
> From: W1GOR [mailto:W1GOR@Maine.RR.Com]
> Sent: Thursday, November 25, 2004 9:39 AM
> To: email@example.com; firstname.lastname@example.org
> Subject: Re: [TenTec] Tentec Orion & Oscilloscope question
> Entering 4263 as a Bird search yields nothing... The two
> types of samplers
> are 4273 and 4275...
> 73, Larry - W1GOR
> ----- Original Message -----
> From: "Dick Green WC1M" <email@example.com>
> To: <firstname.lastname@example.org>; <email@example.com>
> Sent: Thursday, November 25, 2004 1:04 AM
> Subject: RE: [TenTec] Tentec Orion & Oscilloscope question
> I use a Bird 4263 RF Sampler. It's designed for exactly what
> you want to do. You put it inline with the coax, and it has a
> sampling port for your scope probe. Insertion loss is
> minimal. See the following link, near the bottom of the page:
> Hope this helps.
> 73, Dick WC1M
> > -----Original Message-----
> > From: Eric SENSI [mailto:firstname.lastname@example.org]
> > Sent: Tuesday, November 23, 2004 3:41 PM
> > To: email@example.com
> > Subject: [TenTec] Tentec Orion & Oscilloscope question
> > Hello all,
> > As I'm not an electronic engineer but just an IT engineer :-)
> > I'd like to know the better way to take the "modulated signal" to
> > inject it into an oscilloscope ?
> > I'm very new to this so be cute with me please.
> > At the moment I have :
> > - A Tentec Orion;
> > - A Tektronix 453A oscilloscope (in very nice shape and working
> > condition, bought from a Tektronix engineer for nothing !)
> > (it's a 50MHz Dual Channel Delayed Sweep Oscilloscope);
> > - A new set of oscilloscope probes with 1:1 and 1:10 attenuation;
> > - A bunch of newbie questions ! HI
> > I'd like to see my modulation signal on the scope while I'm
> talking. I
> > know a guy who is using a "T" shapep M/F/F plug at the end
> of the ANT
> > 1 output... One way goes to the antenna, the other to the
> probe ! I'm
> > not sure it's the better way to catch the signal but I
> can't tell you
> > exactly why. I'm afraid of that "open" connection on one
> side of the
> > output SO-239 socket... think it's not good for the PA itself.
> > Is there another output on the Orion to catch the signal ? Via the
> > transverter output jack (I don't think so, because the main
> > transmitter is not enabled in that case)... or on the AUX
> I/O or the
> > LINE OUT RCA jack ?
> > Many thanks to those who will help with this !
> > All the best, Eric de ON6CV.
> TenTec mailing list
TenTec mailing list