|Subject:||Re: [TenTec] Question regarding Omni VI+ on SSB|
|From:||"A. Sewell" <email@example.com>|
|Date:||Thu, 25 Nov 2004 11:39:54 -0600|
With all the TT705 mic discussion I pulled my instruction sheet out to
see just what it has to say.|
"The Model 705 incorporates a momentary type Push-To-Talk (PTT) button (gray), a Push-On, Push-Off locking type button (black), electronic circuitry to switch the microphone on, a signal amplifier that adds 13dB of gain to the output level, an attached output cable and a battery compartment for a 9 volt alkaline battery"
ELECTRONICS: C-Mos PTT switch, C-Mos signal amplifier, NPN T/R transistor.
CURRENT REQUIRED: Receive mode: Less than 2 microamperes.
Transmit mode: 2 milliamperes typical, with 9 volt battery.
Chuck (Jack) Hawley wrote:
Yes it has a preamp. See my question about how mine draws around 16 ma which seems like a lot. Chuck, KE9UW
_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||RE: [TenTec] Question regarding Omni VI+ on SSB, Charles Greene|
|Next by Date:||RE: [TenTec] Question regarding Omni VI+ on SSB, Jim Brown|
|Previous by Thread:||RE: [TenTec] Question regarding Omni VI+ on SSB, Chuck (Jack) Hawley|
|Next by Thread:||RE: [TenTec] Question regarding Omni VI+ on SSB, Jim Brown|
|Indexes:||[Date] [Thread] [Top] [All Lists]|