[Top] [All Lists]

Re: [TenTec] Omni 6+ rx dead

To: tentec@contesting.com
Subject: Re: [TenTec] Omni 6+ rx dead
From: Jim <jlboockh@earthlink.net>
Reply-to: tentec@contesting.com
Date: Thu, 25 Nov 2004 21:02:38 -0600
List-post: <mailto:tentec@contesting.com>
When this has happened to me, it was because I accidentally pushed in the ATTN button. I'm sure you are not scatterbrained enough to do something like that!

Jim N4AL

Jim Miller WB5OXQ wrote:

My old faithful and beloved omni 6+ had no receive when I turned it on last
night.  It will transmit fine but the receiver acts like there is no antenna
connected to it on all bands.  There are the usual birdies here and there
and it will receive the signal from another hf rig who's antenna is about
50' away.  The 100 watt signal from the other rig gives only about a S5 on
the omni's S meter.  I cnecked the antenna connections and the rca cables to
and from the qsk connection on the Centurion and all seems good.  I replaced
the amp cables with a jumper with no results.
Unless someone has a suggestion I guess it is off to TenTec Service.
Jim in Waco, WB5OXQ.

_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>