[Top] [All Lists]

Re: [TenTec] scratch pad feature in Omni VI

To: <tentec@contesting.com>
Subject: Re: [TenTec] scratch pad feature in Omni VI
From: "Paul Gates" <kd3jf@hotmail.com>
Reply-to: tentec@contesting.com
Date: Sun, 28 Nov 2004 19:08:32 -0500
List-post: <mailto:tentec@contesting.com>
You have peaked my interest... I think I will try the scratch pad on an Omni!
Paul Gates
  ----- Original Message ----- 
  From: Paul DeWitte K9OT<mailto:k9ot@mhtc.net> 
  To: tentec@contesting.com<mailto:tentec@contesting.com> 
  Sent: Sunday, November 28, 2004 1:20 AM
  Subject: [TenTec] scratch pad feature in Omni VI

  I have never used the memory or scratch pad features in my Omni VI+. Tonight 
I decided to try out the scratch pad.
  I stored a frequency in the scratch pad and then moved to a different 
frequency. I pushed  m>vfo and brought up the frequency that I stored. Up to 
now all is well and good.
  Lets assume that the frequency in the scratch pad is a DX station that I want 
to monitor and try to get when the time is right. The frequency that I moved to 
is one that I am calling CQ. So when I go to the scratch pad freq I want to 
return to my CQ frequency. 
  Other than turning the VFO to get back to the CQ frequency,  I have not 
figured out how to return.  Is there something that I am missing here?
  If there is not a quick return path, this is totally useless.
  Does anyone use this fearure?  I know that I can do this using VFO A and VFO 
B but that should not  have to be the way to do it.

  Thanks 73 Paul K9OT
  TenTec mailing list
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>