TenTec
[Top] [All Lists]

Re: [TenTec]omni-d (genealogy)

To: <tentec@contesting.com>
Subject: Re: [TenTec]omni-d (genealogy)
From: "Steve N4LQ" <n4lq@iglou.com>
Reply-to: tentec@contesting.com
Date: Sat, 11 Dec 2004 10:29:54 -0500
List-post: <mailto:tentec@contesting.com>
I believe you could consider the Delta 580 as TenTec's first Dual Conversion receiver. The first IF was at 11mhz and the second was at 6.3mhz. The 11mhz IF had a roofing filter with no optional filters available. I think this was their only product built like this. This scheme eliminated the spurs on 17 meters plus some image problems found in the single conversion rigs, Omni, Triton, Argosy etc. The 11mhz IF had very little if any gain and contributed almost nothing to the noise therefore the 580 was one of the quietest receivers around. The variable preselector was replaced by fixed passband circuits for the front end. Unfortunately it retained the audio derived agc design and with no RF gain control it suffered from the annoying pop on strong signals with no easy means of compensation.

Steve N4LQ
----- Original Message ----- From: "Duane Grotophorst" <n9dg@yahoo.com>
To: <tentec@contesting.com>
Sent: Saturday, December 11, 2004 10:02 AM
Subject: Re: [TenTec]omni-d (genealogy)



Another radio to think about when pondering the Ten
Tec genealogy is the 580 Delta. It is rather unique in
that it did not use any 9MHz IF filters at all like
the 540/544, Omni's, Argosy's, Paragon and others. The
reason I bring this up is that the same 6Mhz IF
filters that were used for the 580 Delta later became
the second IF filters for the Corsair's, Omni V/VI's
and Paragon. So I have always thought of the Corsairs
and later analog-only IF Ten Tec models as being
somewhat of a homogenization of the original Omni
series and the 580 Delta, - for whatever that's worth.

Duane
N9DG



--- Carl Moreschi <n4py@earthlink.net> wrote:

Bill,

This was done about a year ago or so on this
reflector.  But I will try from
memory to give the genealogy.

After the Omni C, the main transceiver evolution
continued as follows:

Corsair
Corsair II
Paragon
Omni V
Omni VI
Paragon II
Pegasus
Jupiter
Orion

There were of course many side branches for all the
other transceivers.


Carl Moreschi N4PY Franklinton, NC ----- Original Message ----- From: <Able2fly@aol.com> To: <tentec@contesting.com> Cc: <n4py@earthlink.net> Sent: Friday, December 10, 2004 7:26 PM Subject: Re: [TenTec]omni-d (genealogy)


> > Karl, > > Thanks for the history lesson (as far as it went). Could you please carry it > a bit farther to include the Paragons, Corsairs, and the ensuing Omnis. If > it hasn't been done already, it'd be nice for someone to compile a Ten Tec > time line listing all the transceivers and their features. It'd be sad to see > the memory such a rich part of hamdom's past lost altogether. > > 73, > Bill K3UJ >

===========================================================
> <Karl wrote:>
>
> The original Omni's were as follows:
>
> Omni A  - Analog  version
> Omni D -  Digital version
>
> Then came the series B  modification which added
two additional IF filter
> slots, 30 meter receive and  an AUX band position.
 So this made
>
> Omni A Series B - Analog  Version
> Omni D Series B - Digital Version
>
> Later, TenTec had an upgrade  kit that added the
12 meter band to the AUX
> position, and 30 meter transmit  to the above
radios.
>
> Finally, the Omni Series C came out.  It was
available only in digital.
It
> added the 18 mhz band, individual  selection of IF
and audio filter, and
XIT.
>
> 73,
>
> Carl Moreschi  N4PY
>
>
>
>
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec





__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com


_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>