TenTec
[Top] [All Lists]

Re: [TenTec] OT: Heathkit HA14 measurements?

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] OT: Heathkit HA14 measurements?
From: "NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 4 Mar 2005 23:22:25 -0800
List-post: <mailto:tentec@contesting.com>
Ken,

I had never heard that and I don't see any reason for it unless the Pi
filter is designed improperly.  I haven't checked the component values of
the Pi filter so I can't answer your question.  Perhaps someone else here
can.

I'm not going to worry about that because I use openwire fed antennas here
and my Annecke symmetrical matchboxes do a pretty good job of adding
additional bandpass filtering. I haven't measured but I'll guess it to be at
least 15 to 20 dB.  I also use Dunestar bandpass filters between my
transceiver and my amp so that assures the harmonics from the TX are already
at a very low level.

73
Rick

-----Original Message-----
On Behalf Of Ken Brown
Sent: Friday, March 04, 2005 2:40 PM
Subject: Re: [TenTec] OT: Heathkit HA14 measurements?

Hi all,

I have heard that the HA-14 is good at producing harmonics. Perhaps due 
to using lower C in the Pi net to make it more compact. I have never 
seen one up close, nor have I seen a schematic for one. Does it use the 
same C and L values in the pi net as Heath's other pair of 572-B amps, 
the SB-200/201? Or is there a big difference. It seems like it could be 
a real neat compact amplifier to have, as long as it does not produce 
QRM. Maybe it would be good in a BPL neighborhood.

DE N6KB


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>