Well, it depends on your mic and your voice.
I normally keep my TX EQ at between -14 to -18. Way too bassy with TX EQ at
0. SSB bandwidth settings vary by mode (SSB, AM). If the band isn't
crowded or I'm on AM I leave it at 50/3900. Otherwise at maybe 150/3000.
And then there are the 60M rules, etc.
The same values work whether I'm using a Studio One through the mic
connector or an EV RE-20 and audio rack through the AUX port.
Audio reports are always good, especially wide open. It's pretty easy to
judge for yourself using the MON function.
Grant/NQ5T
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com] On Behalf Of Manuel Alonso
> Sent: Thursday, May 12, 2005 1:04 PM
> To: tentec@contesting.com; ssbaudio@yahoogroups.com
> Subject: [TenTec] Orion TX Audio Settings
>
> Hello,
>
> Have owned an Orion for a while, but never get good audio
> reports like I get with my TS-850/DSP-100 or even my ProIII.
>
> I have tried the Orion with the Heil PR-40 as well as with my
> "audio rack" with no success.
>
>
>
> What are the ORION settings such as bandwidth, tx rolloff,
> and TX eq that work the best for other users.
>
> Manny
>
> KC4MNE
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|