Bill:
You share some really nice positive responses to these issues. It is nice
to see some intelligence shared here on the reflector.
73
Bob, K4TAX
----- Original Message -----
From: "Bill Tippett" <btippett@alum.mit.edu>
To: <tentec@contesting.com>
Sent: Tuesday, May 24, 2005 12:46 PM
Subject: [TenTec] My new ORION
> WQ7X wrote:
> >Distortion, so I tune up 7kHz and there we go S9+37dB station.
> >Turn off preamp and dist. gone.
>
> Mark, just for fun, try these two things (separately):
>
> 1. Back off on RFGAIN, Preamp On.
>
> OR...
>
> 2. Set Threshold to 3-5 uV, Preamp On.
>
> ...and see if you still have the problem. If
> turning Preamp Off is now solving your problem,
> I suspect both the above should also work.
>
> >No problem, but long term DSP should handle this.
>
> I completely agree. This had never been a problem
> until 1.372 and it should be impossible for any
> user to EVER overdrive the DSP, no matter where
> things are set. I'm sure it will be fixed but
> there are some fairly simple work-arounds until
> the next public firmware release.
>
> 73, Bill W4ZV
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|