>> I just purchased a "new" Omni V. I'll be getting the matching power
>> supply
> and adding all the optional filters over time. However, I wanted to ask
> for
> some guidance and learned opinions from the group.
>
> This one is serial number #94A10059. I assume this means it was rig
> #10059,
> and it was manufactured in 1994. Is this correct? Where does this one
> fall
May 1989
> on the total list of Omni V's manufactured? Are there any particular
> "issues"
> with this vintage Omni that I should be aware of?
No RIT is the main drawback. IF hiss can be anoying.
> I'm aware that N4PY has a V.9 mod. What are the pros/cons? Is it worth
> the
> effort? I don't need direct keypad entry of frequency or use memory
> storage
> much. As far as I can tell, it isn't worth the effort (for me). However,
> the
> spotting feature would be nice ...
Still won't have RIT. Do you want computer interface with this oldie?
> I'll be adding one 9mHz filter for CW. Should I get the 500 Hz or 250 Hz
> filter?
Get the 500hz. Using the 250hz, the IF hiss will drive you bonkers. Lot of
extra attenuation too.
> Is the FM board still available anywhere?
Seriously doubt it .
> I'd like to be able to adjust power output down to less than 5 watts using
> the front panel control. Is there a tuning procedure or separate mod to
> accomplish this?
I've seen it done. Do a Google search. I don't recommend it however. You'll
just frustrate those trying to hear you. The real heros in QRP are the QRO
stations straining their poor ears.
>
> TIA/73, Jim K5HO
>
> ---------------------
> Nunquam Secundum
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|