For PSK31, I use the following:
Tx BW: 3000 Hz
LF Rolloff: 100 Hz (helps keep 60 Hz out)
TX Eq: 0 dB
You want the widest and flattest passband for the Tx. On Rx, I search
the waterfall with ~ 3 kHz BW, but if there is much QRM, it's nice to
"zoom" in using PBT and BW settings (or H & L cut) to bracket the
signal in as little as a 100 Hz window. It's good to have the Rx Eq
set to 0 db, also -- so you can work better with signals at the left
of the waterfall.
Hope this helps.
73 Martin AA6E
On 6/1/05, email@example.com <firstname.lastname@example.org> wrote:
> I use both the Jupiter and the Orion for PSK31. I
> only work the 20 Meter band and use USB with a
> soundcard. I have been setting the TX FILTER BW
> at the most narrow setting because of PSK31's
> narrow (31hz) width. This only allows me to use
> approx the first one third of the waterfall for TX.
> I have read that normal SSB settings are correct
> and then I read in another manual that TX BW
> should be set according to the digital mode in use.
> So what setting is correct for the Jupiter and the
> 73 es Tnx Ahead,
> John / KG4WNA
> TenTec mailing list
TenTec mailing list