[Top] [All Lists]

Re: [TenTec] extension of heil mic cable

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] extension of heil mic cable
From: "Scott Harwood" <scotth@hsc.edu>
Reply-to: scotth@hsc.edu,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 7 Jun 2005 15:35:23 -0400
List-post: <mailto:tentec@contesting.com>
Great solution! Thanks.
Scott K4VWK
---------- Original Message ----------------------------------
From: yash@aol.com
Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date:  Tue, 07 Jun 2005 15:25:16 -0400

>Hi to all.
>  Let me add my 2 cents worth on this cable problem. I cut the mic cable 
>about a foot back of the mic body ,spliced in a 4 foot section of radio 
>  mic cable and did a careful solder job of the wires ,end to end ,slid 
>a tiny section of shrink tube over each connection and a larger section 
>over the cable
>  shrunk the tubeing and had a nice ,professional looking splice on the 
>cable. It was just slightly larger than the cable itself. Did the
>  same thing on the other end ... end of problem. Don't look for Heil 4 
>or 5 pin XLR looking connectors ,you will not find them easily.
> Everybody have a great day.
>  dale K8QI
>TenTec mailing list

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>