Hi Grant etal; Not so obvious I suspect. Thanks very much for putting it
on. I cant wait (yes I can) to try it.
73 de Dean W5PJR
----- Original Message -----
From: "Grant Youngman" <firstname.lastname@example.org>
To: "'Discussion of Ten-Tec Equipment'" <email@example.com>
Sent: Saturday, June 11, 2005 10:41 AM
Subject: [TenTec] Orion NR on SSB
> I may well be the last guy on the block to have this particular epiphany
> One of the things that the Orion NR does on voice modes is produce an
> extremely bassy output (to my poor ears, anyway). No highs, and a
> substantial loss of speech articulation. My solution was always to tilt
> RX EQ to a high negative value to restore balance, which sort of helped,
> was still unsatisfactory. The noise may have been reduced but I still
> the resulting audio muffled and unpleasant. I'm sure this effect is the
> result of the way the Orion NR builds filters around the speech
> and the fact that the typical male voice has a great deal of low frequency
> energy. The nut of it is that I rarely used the Orion NR on SSB.
> While checked in to a MARS voice net this morning on a very noisy 7.3 Mhz
> frequency, I got to fiddling with the radio to see what else could be
> An external audio NR had a more balanced audio output spectrum, but I
> generally consider those things unsatisfactory in most cases for other
> reasons. And I can only listen to their typical "watery" output for so
> before throwing in the towel.
> I found that by simply using PBT to kill the low audio frequencies in the
> received signal spectrum (set to 200-300Hz) that the result was superb.
> Good articulation, no bassy audio. Not FI, but if you have to use NR, FI
> becomes a non-issue anyway. In fact, the whole NR result was much better,
> possibly due to the fact that the energy in the low frequency speech
> spectrum wasn't hitting the AGC. It was a real pleasure to have really
> sounding signals popping up out of the quiet.
> I'm just surprised it took me 2 1/2 years to discover this simple and
> obvious tweak :-)
> TenTec mailing list
TenTec mailing list