I do have the same feeling; in these days (since 1.372 DSP gain control
introduced) the NR improves signal to noise ratio. Check out ages 15/16
and 46 of the manual.
I think under quiet band conditions no NR is needed but a "real (LF) NR"
system as in the Omni 6+ and apparently in early Orion firmware versions
wud be nice to have too. Maybe release 2.0 gives us the option ??
Guess "real" NR is more often required than SN/R improvement?? (160m?)
Am I missing something ? and just FWIW (consider myself not being a real
technician nor an analyst)
[mailto:email@example.com] Namens Steve N4LQ
Verzonden: woensdag 15 juni 2005 2:59
Aan: Discussion of Ten-Tec Equipment
Onderwerp: Re: [TenTec] Orion NR problem
I don't recall the firmware revision my Orion had when I bought it but I
recall turning on the NR and my jaw dropping. It was awesome. All the
noise vanished and I none of the goofy dsp artifacts that most rigs
Then I "upgraded" to a new firmware and the NR ceased to work. Pushing
button had a tiny effect but it was almost useless. I tried many master
resets to no avial. I think we see different opinions here because some
are working and some are not or not much.
----- Original Message -----
Sent: Tuesday, June 14, 2005 8:29 AM
Subject: Re: [TenTec] Orion NR problem
> I sometimes find it hard to tell if the NR is working or not. Band
> still there. But I find that if I let the NR "do its thing" the S
> gradually declines and even though I still hear noise - it is at a
> level than before. My natural inclination was to crank up the audio
> little bit so I could "hear" the radio. Then when a signal comes on,
> jumps out at you.
> I have found that you must push the button firmly. A partial push or
> light touch will change the display but not engage the NR. I know that
> makes no
> sense but that is the way it works on my Orion. I use a setting of 3
> find that reduces the noise in about a second or two with a minimum of
> Craig "Buck"
> Fredericksburg, Virginia USA
> TenTec mailing list
TenTec mailing list
TenTec mailing list