[Top] [All Lists]

Re: [TenTec] Zero beating aids

To: tentec@contesting.com
Subject: Re: [TenTec] Zero beating aids
From: "Richard Detweiler" <rdetweil@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 29 Jun 2005 14:21:25 -0500
List-post: <mailto:tentec@contesting.com>
Take a look at CW Get,  It has a similar function on the audio spectrograph, 
but also add  CW Decode which is nice to look at in a contest to double 
check what you thought you heard.

Best 73's
>From: "Tommy Alderman" <aldermant@alltel.net>
>Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
>Subject: Re: [TenTec] Zero beating aids
>Date: Wed, 29 Jun 2005 15:04:54 -0400
>Tunewin really works well for zero beating to within +/- 10 hz or so. I
>have never developed the 'skill' to match tones, my best success with
>zero beating was with the Corsair 2 where I could actually hear the tone
>approaching zero beat. But just can not match tones at 500 or 700 Hz.
>A simple RCA connectered cable from my Omni 6 Plus audio output into my
>sound card provides me with a variable width & height display that you
>can position anywhere on your PC screen. You can change the center
>frequency presentation to match that of your rig's offset. You simply
>tune your rcvr until the rcvd signal lines up with your center frequency
>marker, and your zero beat.
>It's turned out to be one of the best little 'tools' I have on my PC
>(along with Spectrgram). And it's freeware!
>Tommy - W4BQF
>-----Original Message-----
>From: tentec-bounces@contesting.com
>[mailto:tentec-bounces@contesting.com] On Behalf Of Bill Tippett
>Sent: Wednesday, June 29, 2005 11:56 AM
>To: tentec@contesting.com
>Subject: [TenTec] Zero beating aids
>       I use those old-fashioned things
>God gave me (ears and brain), but here's
>something modern folk can use with a PC
>and soundcard:
>                       73,  Bill  W4ZV
>TenTec mailing list
>TenTec mailing list

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>