TenTec
[Top] [All Lists]

Re: [TenTec] WTB: Rack Mount Kits for Omni VI+ & 253 AutoAntenna Tuner

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] WTB: Rack Mount Kits for Omni VI+ & 253 AutoAntenna Tuner
From: Augie Hansen <augie.hansen@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 01 Aug 2005 09:40:25 -0600
List-post: <mailto:tentec@contesting.com>
On 7/31/05 11:20 PM, "Aidehua@aol.com" <Aidehua@aol.com> wrote:

> Would very much like to get these.  Any suggestions appreciated.
> 
> Thanks,
> Ed NI6S

Hi Ed,

I'm in the process of selling some Ten-Tec equipment to another ham and he
does not want the rack adapters, so I have adapters for the 253 tuner, the
Omni V/VI-series transceiver, and also a set for the Titan linear. Also, I
have one single-unit flat panel with the TT logo and one without a logo.
These are used to provide needed clearance between racked items.

In addition, I have a 19-inch rack that is 21 inches high, grey in color to
match the TT gear, with rounded corners and a hinged perforated top to
provide good air flow for the tubes in a linear mounted at the top of the
rack. There are holes in the right side for mounting a low-pass filter and a
dummy load, and reinforced handles on each side.

If your interested in any of them let me know. I don't have the cost data
handy, but in the meantime I'll figure out some reasonable prices for these
items. 

Gus Hansen 
KB0YH

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>