TenTec
[Top] [All Lists]

Re: [TenTec] Orion RX Compression question

To: tentec@contesting.com
Subject: Re: [TenTec] Orion RX Compression question
From: "Lawrence Stoskopf" <stoskopf@tri.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 06 Nov 2005 00:09:59 GMT
List-post: <mailto:tentec@contesting.com>
While doing my typical casual CQWW Phone effort, I typically run with the 
bandwidth at 3 KHz or so, seems to help my aging ears with some of the 
non-English speakers.  300 Hz PBT at the bottom of the passband.  Seldom 
touch any of the other functions. 

This year limited myself to 20M.  Four or five times some idiot would tune 
up for a considerable time on a weak DX signal.  Give the Orion credit that 
instead of covering the wanted signal, I would note that his signal would 
make the background noise would go away and the wanted SSB signal would seem 
to rise from the noise. 

Any of you Rx tech experts know what the correct terminology for this 
interaction is? 

Strictly S&P, 350 Qs, 32 zones, 99 countries.  No VK, ZL, or HC8????? 

Great rig, 

N0UU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TenTec] Orion RX Compression question, Lawrence Stoskopf <=