[Top] [All Lists]

Re: [TenTec] openwire feed OT

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] openwire feed OT
From: "Darwin, Keith" <Keith.Darwin@goodrich.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 1 Feb 2006 12:21:16 -0500
List-post: <mailto:tentec@contesting.com>
 To feed open wire through a wall - use coax.  But not like you think.

Get 2 pieces of coax, equal in length.  Route them through the wall,
connect center conductor only, one to each leg of the ladder line.
Then, inside the shack, short the coax shields together and continue the
run to your shack with ladder line.  There you have a coax cable based
wall through method.

Or maybe continue with the parallel coax right to the in-shack coupler.

- Keith KD1E -
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>