Right you are !
In addition to my beam, which I love dearly, I also have a 160m full wave
loop. It's only between 25 to 40 ft above the ground at various points
along its length. I have never worked dx with it on 160, but I sure have on
80, 40, and on up. Also not well known is the fact that a loop is a very
quiet antenna. I sometimes use it just because the QRN is so loud. If I
could only have one antenna, and if I also wanted to work all the bands,
that is the antenna I would have.
Of course the 7 element beam, up on the tower, fed with LMR-400 outperforms
it on 20/15/10, but then, it's supposed to !
73 de Gary, AA2IZ
----- Original Message -----
From: "Stuart Rohre" <email@example.com>
To: "Discussion of Ten-Tec Equipment" <firstname.lastname@example.org>
Sent: Thursday, February 02, 2006 4:41 PM
Subject: Re: [TenTec] Loop/open wire/AH3
> Not well understood is the one wave horizontal loop is only a cloud burner
> on its lowest (1l) band when put at a modest elevation.
> We regularly use 20 foot high horizontal loops that are several
> on the bands of interest to get gain and a combination of low angle and
> higher angle for all around Field Day propagation.
> TenTec mailing list
TenTec mailing list