[Top] [All Lists]

[TenTec] FS: Argosy 525 with calibrator and 8 pole filter

To: tentec@contesting.com
Subject: [TenTec] FS: Argosy 525 with calibrator and 8 pole filter
From: WA4VEC@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 4 Feb 2006 14:35:21 EST
List-post: <mailto:tentec@contesting.com>
Shack cleaning prior to the Orlando Hamvention has uncovered an Argosy 525  
that I rarely use anymore.  I thought I would offer it on the   reflector 
before hauling it off next Friday. 
It has the crystal calibrator and the 8 pole SSB filter in place of  the 
stock 4 pole one.  It works great and will put out a bit more than 50  watts.  
only problem I have noticed is that the S meter will sometimes  stick to the 
left and can be unstuck by a gentle tap.   I did not  notice this problem the 
last time I used it, so perhaps it will go away with  some additional air 
The top panel has paint missing and someone added 4 sheet metal screws (I  
think to use it with a mobile bracket).  The front panel is not perfect but  
the knobs are intact and all the lettering is readable with the 3.5  mark 
being a bit faded.   You can also see some cracks around the  front panel 
  I will take $150.00 plus shipping from  32225.  I can also deliver it to 
Orlando next weekend.
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] FS: Argosy 525 with calibrator and 8 pole filter, WA4VEC <=