Actually, SSB is a narrow band communication mode and never was intended to
"sound good". Hence the existence of good sounding AM remains. Regardless
of it being deemed by some to be an outdated mode.
Take any portion of the audio spectrum, chop it to a 2.4KHz bandwidth and
one has "telephone quality" designed for effective communication.
----- Original Message -----
Sent: Saturday, February 04, 2006 4:53 PM
Subject: Re: [TenTec] Mics
> Remember folks , we are SUPPOSED to sound like ducks on SSB, if we want
> fidelity, use FM.. My thought is a good , easy to listen to signal, that
> intelligible beats the heck out of an over modulated phony bass enhanced
> that sounds like you have the microphone in the bottom of a 3 pound
> coffee can.
> I try to put out a good sounding signal, ( Orion / TT studio one ) and I
> an hm 10 on the 746, and an mc-80 on the ts2000, but a good signal is ok,
> please don't over process it to death . We all have a distinct voice, and
> natural in nice..not too much processor, not too much microphone gain..
> tickle the ALC..
> Just my opinion , YMMV tom N6AJR
> In a message dated 2/4/2006 2:42:35 P.M. Pacific Standard Time,
> firstname.lastname@example.org writes:
> On 2/4/06, Rob Atkinson, K5UJ <email@example.com> wrote:
>> the only sure fire way to figure out what a mic/rig is doing on-air is
>> buy or borrow a decent rx (rx bandwidth = to ur tx bandwidth and flat
>> response) put on cans and listen to yourself while you tx into a dummy
> You can judge your audio much better if you're not talking while you're
> listening. That's why it should be recorded either by you or by another
> station and then played back.
> 73, Barry N1EU
> TenTec mailing list
TenTec mailing list