[Top] [All Lists]

Re: [TenTec] Some perspectives on the Argonaut V

To: scotth@hsc.edu, tentec@contesting.com
Subject: Re: [TenTec] Some perspectives on the Argonaut V
From: RaySoifer@cs.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 7 Feb 2006 10:58:38 EST
List-post: <mailto:tentec@contesting.com>
In a message dated 2/7/06 3:51:10 PM GMT Standard Time, scotth@hsc.edu 
> he only complaint I have is the documentation in the manual is kinda skimpy 
> for digital modes.  I did find out on the Programer's site the settings for 
> the RS232 port.  If anyone is interested they are:
> 1200 Baud  No Parity, 8 Data Bits 1 Stop Bit.

My experience is that the Argo V works fine on PSK and RTTY using just VOX 
and audio connections to the sound card, through the Aux port on the Argo.  

Ray W2RS
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>