Set the rolloff to 180 and the EQ to -8. Be careful with the SP.
----- Original Message -----
From: "Mark DeBord" <firstname.lastname@example.org>
Sent: Monday, February 13, 2006 8:23 PM
Subject: [TenTec] V2.0 for the original Orion
> Update so far.
> Loaded the beta code on the original Orion. Did a master reset.
> the display is much dimmer and the contrast must be set to about 42. The
> sweep display works great. Mine had the hardware mod already since I
> mine recently. The monitor function works better too; do not have to turn
> the af gain up when listening to my audio; matches the receive level now.
> However, the transmit audio has changed. I just recently bought the w2ihy
> boxes and had my equalization and mic gain on th Orion set to match.
> However, the mic gain must now be reduced to almost 20 with the Studio One
> (which might be good) and the TX equalization is off. Not sure what the EQ
> settings must be set to now. I used to run it at -6 db with the w2ihy
> equipment, but will have to find the sweet spot now. I think I will need
> re-adjust the w2ihy equipment equalization to get my audio back in line. I
> actually loaded the old software back since I did not have time to play
> the transmit audio tonight; will try again later. If anyone else figures
> out, using the Studio One, please post.
> Mark KA4ICK
> TenTec mailing list
TenTec mailing list