[Top] [All Lists]

[TenTec] Orion I V2 beta

To: tentec@contesting.com
Subject: [TenTec] Orion I V2 beta
From: "Mark DeBord" <markinkpt@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 14 Feb 2006 14:21:28 -0500
List-post: <mailto:tentec@contesting.com>
See my previous note dealing with V2 beta upgrade.

I went and loaded the beta again just to make sure the TX audio was truly 

V2 beta does change the TX audio; I bypassed my W2IHY equipment and put a 
705 mic directly into the rig. I love the 705 mic since it produces GREAT 
audio and is really "good enough" by itself for general communications. 
However, in my opion with the beta, the quality of audio is not the same. 
There is some kind of artifact in the audio now. The mic gain has to be 
turned way down and there is some kind of "noise" on certain words mixed in 
that you can hear through the monitor. My buddies on 75 meters I QSO with 
regularly noticed a difference in my audio quality as well.
I did try and adjust the equalization, but it is I can never get rid of the 
Everything else is working great and I appreciate Ten Tec letting up try out 
the beta. I just wanted to make sure I identified this issue and also wonder 
what others are seeing and if they have found a correction.


TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>